Paxar 9416 XL manual Example B,3,12,V,150,70,1,2,80,7,L,0 p

B9. height	Bar code height, in 1/100 inches, 1/10 mm, or dots. Minimum
	values:
	English	20
	Metric	51
	203 Dots	40
	300 Dots	60
	For Quick Reference bar codes, the value you enter is the
	symbol’s maximum height. Small bar codes may not be
	scannable.
B10. text	Appearance of text with bar code. For UPC and EAN, use 1
	or 5 - 8. For Quick Response, use 0 2. For all others, use 8.
	Options:

1No check digit or number system or Quick Response Model 1

2	Quick Response Model 2
5	Number system at bottom, no check digit
6	Check digit at bottom, no number system
7	Check digit and number system at bottom
8	No text, bar code only

B11. alignment Choose L, R, C, B or E to align the bar code data correctly in the field. For I2 of 5, Code 39 (Mod 43), Codabar, and MSI, you can use L, R, C, B or E. For all other bar codes, use L.

B12. field rot Field rotation. Field rotation rotates the whole field, not just the characters. Rotation is affected by the pivot point, which varies depending on how text is justified. Lower left corner of field is the pivot point. Options:

0Top of field points to top of supply

1 Top of field points to left of supply

2 Top of field points to bottom of supply

3 Top of field points to right of supply

NOTE: Serial bar codes printed at speeds greater than 3.0

IPS may not scan properly.

Example B,3,12,V,150,70,1,2,80,7,L,0 p

Defines a bar code field (field #3) with 12 characters of variable length starting at row 150, column 70. A UPCA bar code with a density of 2 and a height of 80 is used. The check digit and number system are shown at the bottom. The bar code is left aligned without any field rotation.

Defining Fields 3-15