Paxar 9416 XL manual

Models: 9416 XL

1 212
Download 212 pages 46.15 Kb
Page 138
Image 138

750Printhead is overheated. Turn off the printer to let the printhead cool. If the error persists, call Technical Support.

751Printer did not sense a black mark when expected. The supply may be jammed.

For these errors, Check the

supply tracking

supply marks

black mark sensor position

supply roll for binding.

If the error continues to appear, change the supply.

752Printer sensed a mark in the wrong place.

753Printer sensed a mark that is too long.

756The printer is out of supplies. Load supplies.

757Load supplies. The calibrated supply length differs by plus or minus .25 inches from the format.

758Check supply. Either the supply is not seen, or the on-demand sensor is broken (purchase optional). Check for a label jam. Clear the supply path or reload supplies. This error may occur if you remove a label too quickly in on-demand mode. The printer does not recalibrate after this error.

762Low battery. Recharge the battery.

763Waiting to dispense label. Press FEED.

768Printhead has more than 10 bad dots or is not connected. Make sure the printhead is connected.

8-16Troubleshooting

Page 138
Image 138
Paxar 9416 XL manual