Paxar 9416 XL manual F i n i n g B o x F i e l d s, 22Defining Fields

L7. thickness Using the chart below for reference, write the line thickness (1 - 99) in box L7. Measured in dots.

NOTE: Line thickness fills upward on horizontal lines, or to the right on vertical lines.

L8. "pattern" Line pattern. Enter "".

Example L,S,110,70,110,350,10,"" p

Defines a horizontal line field as a segment starting at row 110, column 70 and ending at row 110, column 350. The line thickness is 10 dots.

D e f i n i n g B o x F i e l d s

Use boxes to form borders or highlight items of interest. Define each box field separately. This field is not assigned a field number, but is counted as a field (keep this in mind, as the printer allows a maximum of 1000 fields per format). You can define any line length and a thickness up to 99 dots, as long as the solid black print does not exceed 25 percent of any given square inch of the label.

Syntax Q,row,column,end row,end col,thickness, "pattern" p

Q1. Q Box (Quadrilateral) Field.

3-22Defining Fields