Manuals / Paxar / Computer Equipment / Switch

Paxar Monarch 415 manual

Models: Monarch 415

1 28

Download 28 pages 51.01 Kb

Page 10

5.Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip.

Monarch 415 Rewind Operator’s Handbook

5.Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip.

6.Push the supply guide against the hub then slide it against the supply.

6

Image 10

Paxar Monarch 415 manual Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip

Contents

Operator’s Handbook Monarch 415 TM RewindPaxar is a trademark of Paxar Corporation Monarch Marking Systems TrademarksP.O. Box Dayton, Ohio Rewinding on a Paper Core Table of ContentsBurster Option Setup and Operation StoppingMonarch 415 Rewind Operator’s Handbook 1. Setting Up Fuse Holder Power Switch Power Cord Monarch 415 Rewind Operator’s Handbook2. Connecting Supplies Rewinding on the HubSlide this disk over the hub and against the stock/core Figure NOTE Units with 3 hubs have a flanged disk instead of a supply guideMonarch 415 Rewind Operator’s Handbook Rewinding on a Paper Core 2. Connecting Supplies5. Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip 3. Operating the Rewind StartingStopping 2. Unscrew the hub knob Figure 4. Changing HubsTo change hubs 1. Pull the supply guide away from the hub Figure Supply Guide3. Remove the hub sections and replace them with the new ones Figure 5. Burster Option Setup and Operation Separator Bars 10. Position the slot in the hub to the top 12. Slide the separator disk and the next core onto the hub Figure 16. Place the third core over the core lock and slide it onto the hub 5. Burster Option Setup and OperationSecond Separator Disk Notch in Disk Third Core Core Lock Second Separator Disk Slot 17. Slide the third core against the second separator disk FigureLabel Edge Monarch 415 Rewind Operator’s Handbook5. Burster Option Setup and Operation Opening in Collar22. Verify that the labels on all three strips are aligned 5. Burster Option Setup and Operation Supply Removal2. Remove the flanged collar assembly 1. Remove the core lock metal stripMonarch 415 Rewind Operator’s Handbook Specifications 6. Specifications and SuppliesSupplies Problem 7. TroubleshootingCorrective Action Location Guide Appendix A Rewind AlignmentLocation Guide Location Guide Location Guide not available Location GuideTOLL FREE For supplies, service, or assistance call