Monarch 415 Rewind Operator’s Handbook
20.Recheck the printer to rewind alignment and fine adjust as necessary.
21.Verify that the separator bars are located between the strip as shown in Figure 19.
22.Verify that the labels on all three strips are aligned.
NOTE: All labels must be aligned as though the supply was never separated to prevent torn strips or labels coming off.
Label
Edges
Separator
Bars
Figure 19
23.Turn the flange counterclockwise to take up any slack in the strips.
24.Set the speed control knob to SLOW.
25.Turn on the rewind, operate the printer, and increase the speed if necessary.
18
