Manuals / Paxar / Computer Equipment / Switch

Paxar Monarch 415 Trademarks, Paxar is a trademark of Paxar Corporation Monarch Marking Systems

Models: Monarch 415

1 28

Download 28 pages 51.01 Kb

Page 2

Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product and the programs and their availability at any time and without notice. Although Monarch has made every effort to provide complete and accurate information in this manual, Monarch shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual.

Trademarks

MONARCH is a registered trademark of Monarch Marking Systems, Inc. 415 is a trademark of Monarch Marking Systems, Inc.

Paxar is a trademark of Paxar Corporation.

Monarch Marking Systems

P.O. Box 608

Dayton, Ohio 45401

Image 2

Paxar Monarch 415 Trademarks, Paxar is a trademark of Paxar Corporation Monarch Marking Systems, P.O. Box Dayton, Ohio

Contents

Operator’s Handbook Monarch 415 TM RewindP.O. Box Dayton, Ohio TrademarksPaxar is a trademark of Paxar Corporation Monarch Marking Systems Rewinding on a Paper Core Table of ContentsBurster Option Setup and Operation StoppingMonarch 415 Rewind Operator’s Handbook 1. Setting Up Fuse Holder Power Switch Power Cord Monarch 415 Rewind Operator’s Handbook2. Connecting Supplies Rewinding on the HubMonarch 415 Rewind Operator’s Handbook NOTE Units with 3 hubs have a flanged disk instead of a supply guideSlide this disk over the hub and against the stock/core Figure Rewinding on a Paper Core 2. Connecting Supplies5. Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip 3. Operating the Rewind StartingStopping 2. Unscrew the hub knob Figure 4. Changing HubsTo change hubs 1. Pull the supply guide away from the hub Figure Supply Guide3. Remove the hub sections and replace them with the new ones Figure 5. Burster Option Setup and Operation Separator Bars 10. Position the slot in the hub to the top 12. Slide the separator disk and the next core onto the hub Figure Second Separator Disk Notch in Disk Third Core Core Lock 5. Burster Option Setup and Operation16. Place the third core over the core lock and slide it onto the hub Second Separator Disk Slot 17. Slide the third core against the second separator disk FigureLabel Edge Monarch 415 Rewind Operator’s Handbook5. Burster Option Setup and Operation Opening in Collar22. Verify that the labels on all three strips are aligned 5. Burster Option Setup and Operation Supply Removal2. Remove the flanged collar assembly 1. Remove the core lock metal stripMonarch 415 Rewind Operator’s Handbook Supplies 6. Specifications and SuppliesSpecifications Corrective Action 7. TroubleshootingProblem Location Guide Appendix A Rewind AlignmentLocation Guide Location Guide Location Guide not available Location GuideTOLL FREE For supplies, service, or assistance call