Monarch 415 Rewind Operator’s Handbook
4.Figure 13 shows the burster with the supplies installed. Place the separator bars in their approximate working positions (i.e. in line with the perforations). When only one bar is needed (for two part supply), slide unused bar to the outboard side.
Separator
Bars
Figure 13
5.Thread the inner strip of supplies under the dancer arm roller, behind the two lower burster shafts, and in front of the top shaft.
6.Thread the middle strip under the dancer arm roller, behind the lower burster shaft, and in front of the two top shafts.
7.Thread the outer strip under the dancer arm roller, behind the two lower burster shafts, and in front of the top shaft.
12
