Manuals / Paxar / Computer Equipment / Switch

Paxar Monarch 415 manual NOTE Units with 3 hubs have a flanged disk instead of a supply guide

Models: Monarch 415

1 28

Download 28 pages 51.01 Kb

Page 8

NOTE: Units with 3" hubs have a flanged disk instead of a supply guide.

Monarch 415 Rewind Operator’s Handbook

6.Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip.

7.Push the supply guide against the hub then slide it against the supply.

NOTE: Units with 3" hubs have a flanged disk instead of a supply guide.

Slide this disk over the hub and against the stock/core (Figure 4).

Figure 4

4

Image 8

Paxar Monarch 415 manual NOTE Units with 3 hubs have a flanged disk instead of a supply guide

Contents

Operator’s Handbook Monarch 415 TM RewindP.O. Box Dayton, Ohio TrademarksPaxar is a trademark of Paxar Corporation Monarch Marking Systems Table of Contents Burster Option Setup and OperationRewinding on a Paper Core StoppingMonarch 415 Rewind Operator’s Handbook 1. Setting Up Fuse Holder Power Switch Power Cord Monarch 415 Rewind Operator’s Handbook2. Connecting Supplies Rewinding on the HubMonarch 415 Rewind Operator’s Handbook NOTE Units with 3 hubs have a flanged disk instead of a supply guideSlide this disk over the hub and against the stock/core Figure Rewinding on a Paper Core 2. Connecting Supplies5. Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip 3. Operating the Rewind StartingStopping 4. Changing Hubs To change hubs 1. Pull the supply guide away from the hub Figure2. Unscrew the hub knob Figure Supply Guide3. Remove the hub sections and replace them with the new ones Figure 5. Burster Option Setup and Operation Separator Bars 10. Position the slot in the hub to the top 12. Slide the separator disk and the next core onto the hub Figure Second Separator Disk Notch in Disk Third Core Core Lock 5. Burster Option Setup and Operation16. Place the third core over the core lock and slide it onto the hub 17. Slide the third core against the second separator disk Figure Label EdgeSecond Separator Disk Slot Monarch 415 Rewind Operator’s Handbook5. Burster Option Setup and Operation Opening in Collar22. Verify that the labels on all three strips are aligned Supply Removal 2. Remove the flanged collar assembly5. Burster Option Setup and Operation 1. Remove the core lock metal stripMonarch 415 Rewind Operator’s Handbook Supplies 6. Specifications and SuppliesSpecifications Corrective Action 7. TroubleshootingProblem Appendix A Rewind Alignment Location Guide Location Guide Location Guide not availableLocation Guide Location GuideTOLL FREE For supplies, service, or assistance call