Manuals / Paxar / Computer Equipment / Switch

Paxar Monarch 415 manual Specifications and Supplies

Models: Monarch 415

1 28

Download 28 pages 51.01 Kb

Page 25

6. Specifications and Supplies

6. Specifications and Supplies

Specifications

Height:	13.75 inches (349.25 mm)
Width:	12.50 inches (317.5 mm)
Depth:	11.5 inches (292.10 mm)

Weight:	18 lbs.	(8.14 kg)

Shipping Weight:	20 lbs.	(9.05 kg)

Power:	115 VAC		60 HZ 30 Watts .3 Amps
	220/240 50/60 HZ 30 Watts .15 Amps

Fuse:	3/8 Amp

Temperature:	Operating: 50° to 95° F (10° to 35° C)
	Storage:		15° to 120° F (-9° to 49° C)

Relative Humidity:	Operating:		10 to 80%
	Storage:		5 to 90%

Hub Diameter:	1 inch (25 mm)
(Options)	3 inch (76 mm)
	4 inch	(102 mm)

Hub Lengths:	3.62 inch (91.9 mm)
	6.75 inch (171.5 mm)
Supplies



Supply Thickness	Minimum: .007 inches (.17 mm)
Tags or Labels:
	Maximum: .015 inches ( .4 mm)

Supply Width:
3.62 inch shaft	Minimum:		.75 inches (19.05 mm)
(91.9 mm)	Maximum: 3.37 inches (85.6 mm)
6.75 inch shaft	Minimum:		.75 inches (19.05 mm)
(171.5 mm)	Maximum:		6.5 inches (165 mm)

21

Image 25

Paxar Monarch 415 manual Specifications and Supplies

Contents

Monarch 415 TM Rewind Operator’s HandbookPaxar is a trademark of Paxar Corporation Monarch Marking Systems TrademarksP.O. Box Dayton, Ohio Burster Option Setup and Operation Table of ContentsRewinding on a Paper Core StoppingMonarch 415 Rewind Operator’s Handbook 1. Setting Up Monarch 415 Rewind Operator’s Handbook Fuse Holder Power Switch Power CordRewinding on the Hub 2. Connecting SuppliesSlide this disk over the hub and against the stock/core Figure NOTE Units with 3 hubs have a flanged disk instead of a supply guideMonarch 415 Rewind Operator’s Handbook 2. Connecting Supplies Rewinding on a Paper Core5. Turn the hub and hub flange at least one full turn counterclockwise to tighten the supply strip Starting 3. Operating the RewindStopping To change hubs 1. Pull the supply guide away from the hub Figure 4. Changing Hubs2. Unscrew the hub knob Figure Supply Guide3. Remove the hub sections and replace them with the new ones Figure 5. Burster Option Setup and Operation Separator Bars 10. Position the slot in the hub to the top 12. Slide the separator disk and the next core onto the hub Figure 16. Place the third core over the core lock and slide it onto the hub 5. Burster Option Setup and OperationSecond Separator Disk Notch in Disk Third Core Core Lock Label Edge 17. Slide the third core against the second separator disk FigureSecond Separator Disk Slot Monarch 415 Rewind Operator’s HandbookOpening in Collar 5. Burster Option Setup and Operation22. Verify that the labels on all three strips are aligned 2. Remove the flanged collar assembly Supply Removal5. Burster Option Setup and Operation 1. Remove the core lock metal stripMonarch 415 Rewind Operator’s Handbook Specifications 6. Specifications and SuppliesSupplies Problem 7. TroubleshootingCorrective Action Location Guide Location Guide Location Guide not available Appendix A Rewind AlignmentLocation Guide Location GuideFor supplies, service, or assistance call TOLL FREE