Paxar TC6037PR manual F i n i n g L i n e F i e l d s, N e T y p e s, End col,thickness,pattern p

D e f i n i n g L i n e F i e l d s

Use lines to form borders and mark out original prices. Define each line separately. This field is not assigned a field number, but is counted as a field (keep this in mind, as the printer allows a maximum of 200 fields per format). You can define any line length and a thickness up to 99 dots, as long as the solid black print does not exceed 30 percent of any given square inch of the label.

L i n e T y p e s

You can create horizontal and vertical lines. There are two ways to define lines.

Segments	You choose the starting point and ending point.
Vectors	You choose the starting point, the angle, and the length
	of the line.
Syntax	L,type,row,column,angle/end row,length/
	end col,thickness,"pattern" p
L1. L	Line Field.
L2. type	Type of line. Only vertical and horizontal lines are supported. Options:
	S Segment. You choose the starting point and ending point.
	V Vector. You choose the starting point, angle, and length.
L3. row	Distance from bottom of print area to the starting
	point.
	English	0 - 365
	Metric	0 - 927
	Dot	0 741

L4. column Distance from left edge of the print area to line origin.

English 0 - 189

Metric 0 - 480

Dots 0 - 383

Defining Fields 2-19