268Word length selection must be 1 (8 bits).

269Stop bits selection must be 0 (1 bits).

270Parity selection must be 0 (none).

271Flow control selection must be 3 (XON/XOFF).

272Symbol set (code page) in the System Setup packet must be

0 (Internal), 1 (ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin 2), 5 (1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8 (1254- Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11 (1257- Baltic), 12 (1258- Vietnamese), 13 (852- Latin 2), 14 (855- Russian), 15 (857- IBM Turkish), 16 (860- DOS Portuguese), 17 (Wingdings), 18 (Macintosh), 19 (Unicode), 20 (BIG5), 21 (GB), 22 (SJIS to SJIS), 23 (GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).

282RS232 Trailer string is too long. Use a maximum of 3 characters.

283ENQ Trailer string is too long. Use a maximum of 3 characters.

284The buffer type must be T (Transmit), R (Receive), I (Image), F (Format), or D (Downloadable Fonts).

285The storage device type in the memory configuration packet must be R (volatile RAM).

286The buffer size is invalid.

287The printhead width must be 0.

288Invalid battery voltage packet. Must be 0 or 1.

289Invalid printer address in communication settings packet. Use 0 or none.

6-10Troubleshooting

Page 96
Image 96
Paxar TC6037PR manual