P l a c i n g t h e G r a p h i c i n a F o r m a t

To include a graphic within a format:

1.Design the graphic image as shown in “Designing Bitmapped Images.”

2.If you are using RAM, place a graphic field in the format file to reference the graphic. See the following section, “Defining the Graphic Field,” for more information.

Note: If you are using temporary storage, you do not need a graphic field in your format to reference the graphic image.

3.Download all the necessary packets (check digit, format, etc.).

4.Send the graphic file to the printer, if you have not already done so. See “Creating a Graphic Packet” for more information.

D e f i n i n g t h e G r a p h i c F i e l d

The graphic field in a format references the graphic image by the graphID in the graphic header. This field is required only if the graphic will be stored in RAM.

Syntax

G,graphID,row,col,mode,rotation p

G1. G

Graphic Field.

G2. graphID

Unique number from 0 - 999 to identify the graphic image.

G3. row

Distance between the bottom of the print area on the supply to the bottom

 

of the graphic image. Measured in selected units.

 

English

0 - 365

 

Metric

0 - 927

 

Dot

0 741

The row specified in the constant text, bitmap, line, or box field is added to the row value above to determine the actual position in the format.

Creating Graphics 4-19

Page 77
Image 77
Paxar TC6037PR manual A c i n g t h e G r a p h i c i n a F o r m a t, F i n i n g t h e G r a p h i c F i e l d