Finding a Network
The printer searches for available networks and lists the SSIDs, signal strength, and encryption for each network. You can connect to an existing network profile if you have the required network security information.
1. Tap 
, Find WLANs.
The printer searches for all networks in range and lists them alphabetically by SSID. This may take a few minutes.
Note: A key indicates that encryption is enabled on the access point. You must have the network encryption settings to connect to a protected access point.
2. Select a network and tap Connect.
The Profile Configuration screen appears.
3. Verify the mode, authentication, encryption, and IP configuration settings.
4. Tap OK when you are finished.