Configuring Code 93 Bar Codes
1. To configure Code 93 settings, tap Code 93 from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
Code 93
Lengths Sets the length(s) for Code
93bar codes.
Allows the scanner to scan Code 93 bar codes.
Variable, specifies that Code 93 bar codes can be any length.
Note: Specifying a range of lengths increases the likelihood of unsuccessful scans.
1 Fixed, specifies a single length for valid Code 93 bar codes. The range for Length 1 is 2 – 99. The default is 4.
2 Fixed, specifies two lengths for valid Code 93 bar codes. The range for Length 2 is 2 – 99. The default is 55.
3. Tap OK to save all the settings and return to the Scanner Configuration screen.
Configuring the Scanner