Configuring Codabar Bar Codes

1. To configure Codabar settings, tap Codabar from the Scanner Configuration screen.

2. Enable each bar code you need to scan.

Codabar

NOTISEdit

CLSIEdit

Lengths Sets the length(s) for Codabar bar codes.

Allows the scanner to scan Codabar bar codes.

Tells the scanner to strip the start and stop characters from scanned Codabar bar codes.

Tells the scanner to strip the start and stop characters from

14-character Codabar bar codes and insert spaces after the first, fifth, and tenth characters.

Note: The 14-character length does not include start and stop characters.

Variable, specifies that Codabar bar codes can be any length.

Note: Specifying a range of lengths increases the likelihood of unsuccessful scans.

1 Fixed, specifies a single length for valid Codabar bar codes. The range for Length 1 is 1 – 99. The default is 5.

2 Fixed, specifies two lengths for valid Codabar bar codes. The range for Length 2 is 1 – 99. The default is 55.

3. Tap OK to save all the settings and return to the Scanner Configuration screen.

5-14System Administrator’s Guide