Configuring Code 39 Bar Codes
1. To configure Code 39 settings, tap Code 39 from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
Code 39 | Allows the scanner to scan |
| Code 39 bar codes. |
Transmit | Tells the scanner to return the |
CD | check digit with the data when a |
| Code 39 bar code is scanned. |
Code32 | Allows the scanner to scan |
Prefix | Code 32 Prefix bar codes. |
Convert to | Tells the scanner to convert Code 39 bar codes to Code |
Code32 | 32 bar codes. |
Full ASCII | Allows the scanner to interpret data in a Code 39 bar code |
Conversion | as an ASCII representation. The scanner does not |
| autodiscriminate between Code 39 and Code 39 Full |
| ASCII. |
| Note: Do not enable this option and Trioptic Code 39 at |
| the same time. |
Trioptic 39 | Allows the scanner to scan Trioptic Code 39 bar codes. |
| The length is always 6. |
| Note: Do not enable this bar code and Code 39 Full ASCII |
| at the same time. |
Verify CD | Tells the scanner to check the integrity of all Code 39 bar |
| codes that it scans. |
| Note: This option only works on Code 39 bar codes that |
| include a modulo 43 check digit. |
Configuring the Scanner