Finding a Network

The printer searches for available networks and lists the SSIDs, signal strength, and encryption. You can connect to an existing network profile if you have the required network security information.

1. Tap , Find WLANs.

The printer searches for all networks in range and lists them alphabetically by SSID. This may take a few minutes.

Note: A key indicates that encryption is enabled on the access point. You must have the network encryption settings to connect to a protected access point.

2. Double-tap the network you need, then tap Connect in the pop-up menu. The Profile Entry screen appears.

3. Tap Next to verify the mode, authentication, encryption, and IP configuration settings.

3-6System Administrator’s Guide