Configuring UPC/EAN Bar Codes
1. To configure UPC/EAN settings, tap UPC/EAN from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
UPCA Allows the scanner to scan UPCA, UPCA+2, and UPCA+5 bar codes.
UPCE Allows the scanner to scan UPCE bar codes.
UPCE1 Allows the scanner to scan UPCE1 bar codes.
EAN8 Allows the scanner to scan EAN8 bar codes.
EAN13 Allows the scanner to scan EAN13 bar codes.
3. For each bar code, decide if you want to tell the scanner to return the check digit with the data when the bar code is scanned. Check the Transmit CD box as necessary.
4. For each bar code, set the Preamble, which specifies the characters that preface the returned data from a UPCA bar code. The choices are
♦None (No Data)
♦SYSCHAR (System Character)
♦SYSCOUNT (Country Code and System Character). Note: The USA country code is 0.