Configuring MSI Bar Codes
1. To configure MSI settings, tap MSI from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
MSI Allows the scanner to scan MSI bar codes.
Transmit Tells the scanner to return the
CD check digit with the data when an MSI bar code is scanned.
Mod Tells which algorithm to use to 10/11 CD ensure the integrity of a
Use 2 Tells the number of check digits that MSI bar codes should
CDs have.
Note: Check digits are not always returned with the data. If you choose two check digits, you must choose a check digit algorithm.
Lengths Sets the length(s) for MSI bar codes.
Variable, specifies that MSI bar codes can be any length.
Note: Specifying a range of lengths increases the likelihood of unsuccessful scans.
1 Fixed, secifies a single length for valid MSI bar codes. The range for Length 1 is 1 – 99. The default is 6.
2 Fixed, secifies two lengths for valid MSI bar codes. The range for Length 2 is 1 – 99. The default is 55.
3. Tap OK to save all the settings and return to the Scanner Configuration screen.
Configuring the Scanner