
NETWORK CONNECTION
NOTE: Consult your network administrator before installing the data interface to avoid possible network conflicts.
Use the network port on the front panel and a Cat5e (or better) cable with
1 | 2 |
IIO IO | IIOIO |
NETWORK
000EDI5
Figure 13. Connecting the EDI5000 to the Endura Network
POWER CONNECTION
To connect power, complete the following steps:
1.Connect a power supply to the data interface. The data interface can be powered from many sources, as described in Power Supply Options on page 17.
2.Connect power to the power supply. The Pelco badge (blue) on the front panel should glow.
ADAPTER
4-PIN
CONNECTOR
Figure 14. Connecting Power
16 |