24
SunTouch Pool and Spa Control System Installation and User’s Guide

Advanced Menu (8/13): Air Sensor

If an optional ambient air temperature sensor is installed, the sensor must be enabled to display the current air
temperature on the main status screen. The optional air temperature sensor is used to protect the system
plumbing and equipment against freeze damage. For information about freeze protection for circuits, valves
and auxiliaries, see page 26. The air sensor can be ordered separately (see page 38 for details).
To enable or disable the air sensor:
Menu button: Select the Advanced menu.
Right button: Select the air sensor setting.
Up/Down buttons: Select Ye s to enable the sensor. Select No to disable the sensor
and not to display the air temperature in the main status screen.
Left button: Press the Left button to return to the main status screen.

Advanced Menu (8/13): System Mode

From the System Mode menu you can configure the SunTouch system to operate as a Solar Only mode
system or as a Pool/Spa mode system (shared equipment). For more information about the “Solar Only” mode
menu, see page 4. For more information about Pool/Spa mode, see page 9.
Menu button: Select the Advanced menu.
Right button: Select the system mode setting.
Up/Down button: Select Solar Only mode to configure SunTouch as a solar system.
Select Pool/Spa mode to configure SunTouch as a stand-alone pool and spa automatic
controller which include solar capabilities.
Left button: Press the Left button to return to the main status screen.

Advanced Menu (8/13): System Type

From the System Type menu you can configure the SunTouch system for a pool and spa system (shared
equipment), or as a Single Body of water system (pool only or spa only). For the “Single Body” system menu
structure, see page 33.
Menu button: Select the Advanced menu.
Right button: Select the system type setting.
Up/Down button: Select Shared Equipment to configure SunTouch for a pool and
spa system. Select Single Body to configure SunTouch as a single body of water
system.
Left button: Press the Left button to return to the main status screen.
Air Sensor
Enabled: Yes
Main Menu 8/13
Advanced
System Mode
Pool/Spa
Main Menu 8/13
Advanced
System Type
Shared Equipment
Main Menu 8/13
Advanced