31
SunTouch Pool and Spa Control System Installation and User’s Guide

IntelliChlor Menu (13/13)

The IntelliChlor electronic chlorination system needs to be connected to the SunTouch system to use the
following IntelliChlor settings. While in normal operating mode (Pool, Spa mode or Spa Fill (Spillway),
SunTouch will control the chlorinator output level. When IntelliChlor is connected to the SunTouch, chlorination
levels can only be changed from the SunTouch control panel. The IntelliChlor control panel will be disabled.
The amount of chlorine introduced into the pool is determined by the amount of salt in the water, the water
temperature and the amount of time the pool operates in “Pool/Spa” mode. Note: While in “Freeze
Protection” mode, IntelliChlor will not operate during the time that the filter pump is operating. For
more information, refer to the IntelliChlor Electronic Chlorine Generator User’s Guide (P/N 520589).
IntelliChlor
To setup IntelliChlor electronic chlorine generator:
Menu button: Select the IntelliChlor menu.
Right button: Enable or Disable IntelliChlor setting.
Up/Down buttons: Select YES to enable or NO to disable IntelliChlor.
Right button: Move to set the chlorine level for the pool.
Up/Down buttons: Set the percentage amount of chlorine to produce in the pool. Set
the chlorination output level for the pool/spa water from 0 to 100%. SunTouch will
determine the chlorinator output level when the system is operating in “Spa” or “Pool”
mode. The amount of chlorine introduced into the pool/sap is determined by the
amount of salt in the water, the water temperature and the amount of time the pool/
spa operates in these modes mode. Use the Up button to increase the percentage
level, and the Down button to decrease the percentage level.
Right button: Move to set the chlorine level for the spa.
Up/Down buttons: Set the percentage amount of chlorine to produce in the spa. Set
the percent level from 0% to 100% (Super Chlorination). Use the Up button to
increase the percentage level, and the Down button to decrease the percentage level.
Right button: Move to the Super Chlorination settings (see below). If you do not
want to Super Chlorinate the pool/spa, press the Right button to skip these settings
until the salt level/status screen displays.
IntelliChlor status and error messages:
Up/Down buttons: The current pool/spa salt level (ppm) is displayed on the screen.
If an IntelliChlor error is detected, an error message will be is displayed on the
screen. To view the IntelliChlor status and error messages, see “IntelliChlor Status
and Error Messages” on page 32. Press the Right button to return to the main menu
items.
Super Chlorination:
Up/Down buttons: Select YES to enable Super Chlorination or “NO” to disable
Super Chlorination.
Right button: Move to the Super Chlorination “Run Hours” setting.
Up/Down buttons: Set the number of hours to run Super Chlorination. 24 hours is
the default setting. The run hours can be set from 0 to 72 hours. Use the Up button to
increase the run hours, and the Down button to decrease the run hours.
Right button: Move to the Super Chlorination salt level setting.
Up/Down buttons: Set the salt level in ppm. Settings are from 0 to 12750 ppm in 50
ppm increments. Use the Up button to increase the salt ppm level, and the Down
button to decrease the salt ppm level.
Left button: Press the Left button to return to the main status screen.
IntelliChlor
Enable: YES
IntelliChlor
Pool %: 50
IntelliChlor
Spa %: 0
Main Menu 13/13
IntelliChlor
IntelliChlor
Super Chlor: YES
IntelliChlor
Run Hours: 12
Salt: 2900 ppm
[OK - NO ERRORS]
Salt: 3200 ppm
[SUPR CHLRINATE]