Event Logs
* Link X Connected
Generated when and
* Link X connection rejected
Generated when Link X connection is being terminated as it could not be attached to a remote site. This may be due to usage limits or suspension resumptions.
* Link X - CSU/DSU not responding, Power Cycle Device.
Generated when the IOLINK router cannot establish communications with the CSU/DSU link module. The power must be cycled on the IOLINK router to cause a restart of the CSU/DSU module.
* Link X Disconnect: Y
Generated when the disconnect of an ISDN call is completed. This event is generated on both sides of the ISDN call. The cause will be one of the causes as specified in the CCITT Recommendation Q.931. Causes of “normal call clearing”, “User busy”, and “Number changed” are printed in words, all other are numeric.
Code | Description |
001 | Unallocated/unassigned number |
002 | No route to specified transit network |
003 | No route to destination |
004 | Channel unacceptable |
006 | Channel unacceptable |
007 | Call awarded and being delivered in an established channel |
008 | Prefix 0 dialed but not allowed |
009 | Prefix 1 dialed but not allowed |
010 | Prefix 1 dialed but not required |
011 | More digits received than allowed, call is proceeding |
016 | Normal call clearing |
017 | User busy |
018 | No user responding |
019 | No answer from user |
020 | Circuit operational |
021 | Call rejected |
022 | Number changed |
023 | Reverse charging rejected |
024 | Call suspended |
025 | Call resumed |
026 | |
027 | Destination out of order |
028 | Invalid number format |
029 | Facility rejected |
030 | Response to STATUS INQUIRY |
031 | Normal, unspecified |
