Event Logs
IOLINK-PRO & 520 Reference Manual —
A.15* Link X, DLCI Y attached to remote site <remote site alias>
Generated for frame relay applications when a connection has been made for the DLCI associated with the remote
site alias.
* Link X down
Generated when a WAN link goes down.
* Link X down to <remote site alias>
Generated when a PPP ISDN call to a remote site is dropped.
* Link X down to <remote site alias>
Generated when a WAN link connection to the specified remote site goes down.
* Link X Incoming Data Call [to/from] [callingDN/calledDN]
Generated when an incoming data call is presented from ISDN and the caller directory number is not
presented.
* Link X – LMI Error Threshold exceeded
Generated when the defined error threshold has been exceeded on the specified link.
* Link not available for remote site <remote site alias>
The link associated with this remote site is already in use.
*Link not configured for frame relay on remote site <remote site alias>
The link that has been assigned to this remote site is not configured for frame relay.
*Link not configured for leased line on remote site <remote site alias>
The link that has been assigned to this remote site is not configured for leased line operation.
* Link X Outgoing Data Call to [DN]
Generated when a data call is outgoing to the dialing network.
* Link X Registered
Generated when the link has registered with the network. This alarm is only applicable for switchtype which
required SPID entry. No incoming or outgoing calls are possible on the link until the link has registered.
* Link X Registration Failed: Y
Generated when the registration of this link with the network has failed. Repeated failures may indicate that
the entered SPID value is incorrect.
* Link X up
Generated when a WAN link comes up.