Event Logs
A.16 — IOLINK-PRO & 520 Reference Manual
* Link X up at Y baud
Generated when frame relay link is established.
* Link X up to <remote site alias>
Generated when a WAN link connection to the specified remote site comes up.
* Local DNS server added to firewall
The IP address of the Local DNS server added to the table of services available through the firewall.
* Local DNS server removed from firewall
The IP address of the Local DNS server removed from the table of services available through the firewall.
* Main Battery is bad
The main battery power for memory backup has dropped below operating level, replace the batteries (see Installation
and Applications Manual, Appendix D.
* Max number of NAT UDP entries reached
Generated when more than the allowed maximum number of UDP entries has been attempted. This feature is in
place to prevent denial of service attacks.
* NAT exported services added to firewall
The IP address of the NAT exported services added to the table of services available through the firewall.
* NAT exported services removed from firewall
The IP address of the NAT exported services removed from the table of services available through the firewall.
* NAT table full
Generated when no more ports are available for Network Address Translation.
* No available remote site for learned DLCI
Generated when, during Frame Relay Auto-learning, the remote site table is filled, no space is available to create
another entry. The user must manually edit the table to remove some remote site profiles before another entry can be
made.
* No available remote site for leased line X
Generated when attempting to set up a default leased line remote site and the remote site table is filled, no space is
available to create another entry. The user must manually edit the table to remove some remote site profiles before
another entry can be made.
* No saved configuration, using default
Generated during a cold start when no saved configuration is available.
* No ISDN call configured for remote site <remote site alias>
The remote site selected does not have the ISDN parameters configured properly to make a connection – re-edit the
site profile.