A470e Users Guide
Paper Loading
Roll paper must be 3.25 inches wide with a maximum diameter of 3.5 inches. Receipt / Journal printers can accommodate 1, 2 or 3 ply paper. Paper and other printer consumables may be purchased from Pertech by calling
To load paper the power must be turned ON. Refer to the pictorial paper loading instructions in the lid of the printer. Specific steps may vary depending on the printer configuration. Follow the instructions on this page for model 487x printers. Use the following page for 481x models.
Failure to load paper correctly may result in a paper jam.
To remove paper that has jammed, it is advisable to:
1)Tear off any paper that fed out of the top of the mechanism
2)Press downward on the metal release bracket
3)While pulling the remaining paper out of the mechanism backwards
487X Paper Loading Instructions
1 Raise cover and | 2 Insert the leading |
remove the spent | edge of the paper |
roll. Insert the new | into the roller on |
roll so the paper | the black block. |
exits from the |
|
bottom of the roll |
|
3 Press and hold | 4 ... Until six inches |
downward on | of paper exits from |
the green paper | the mechanism. |
loading button... |
|
5 Insert the paper through the receipt slot and lower the cover
Pertech® 2006 | 5 |
