A470e Users Guide
Cash Drawer
Each cash drawer driver will source 24 volts for 75 ms to the “solenoid +” pin of the appropri- ate
|
|
|
|
|
|
| Pin # | Cash | Cash | |
|
|
|
|
|
|
|
|
| Drawer A | Drawer B |
1 | N /C | Solenoid + | ||||||||
2 | Solenoid + | N /C | ||||||||
3 | Solenoid - | Solenoid - | ||||||||
|
|
|
|
|
|
|
| 4 | Switch | Switch |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| 5 | Switch | Switch |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| 6 | N /C | N / C |
|
|
|
|
|
|
|
| |||
Advanced Command Language Cash Drawer Command
Immediate Peripheral
ASCII Hex Decimal
DLE DC4 10 14 16 20
|
| s: Peripheral Select |
s m n |
| m: Peripheral On Time |
| n: Peripheral Off Time | |
|
|
Immediately generates a pulse of (m x 2 msec) followed by an off time of (n x 2 msec) on the peripheral output. If s = 00, the first peripheral on pin 2 is activated and if s =01, the second peripheral on pin 1 is activated.
Off Time should be set so that it is greater than or equal to On Time.
Buffered Peripheral Pulse
ASCII Hex Decimal
ESC p | 1B 70 | 27 112 |
|
| s: Peripheral Select |
s m n |
| m: Peripheral On Time |
| n: Peripheral Off Time | |
|
|
Generates a pulse of (m x 2 msec) followed by an off time of (n x 2 msec) on the peripheral output. If s = 00, the first peripheral on pin 2 is activated and if s =01, the second peripheral on pin 1 is activated.
Off Time should be set so that it is greater than or equal to On Time.
A470 Command Language Cash Drawer Commands
Synopsis
ASCII
Hex
Decimal
Cash Drawer “A” | ESC | BEL | 1B | 07 | 27 7 |
Cash Drawer “B” | ESC | BS | 1B | 08 | 27 8 |
Warning: This Printer is designed for use only with Pertech Resources A470 / DH Tech- nology 4700 compatible cash drawers. Damage can result if the A470e is connected to a cash drawer that is incompatible. The cash drawer solenoid resistance must be at least 25 ohms or damage to the printer could result.
Pertech® 2006 | 20 |
