A470e Users Guide
Pertech® 2006 21
Power Supply
The A470e printer uses a NTRL Certied external switching power source with a Limited Power
Source (LPS) output for use in North America, input 100-240 Vac, 50/60 Hz, 1.5 A, with a
maximum power consumption of 60 watts, output is rated at 24 Vdc,2.5A.
The following illustration shows the power cable connector and the pin assignments. The
power cable connector is a 3 pin Mini-Din plug and is located at the back or the printer.
Printer View End (Female)
Power Supply and Cord
24 Vdc
N.C.
Gnd.
Use of this product with a power supply other than the Pertech power supply will require you
to test this power supply and Pertech printer for FCC and CE mark Certications. ( See FCC
Radio Frequency Interference Statement on page iii of this manual).