A470e Users Guide

Pertech® 2006 14

Printer conguration options:

Printer Control Language:

PCL:
A470 Language
ACL Mode(Advanced Command Language)
Mode 1 (DO214)
Mode 2 (ZC2979)
Mode 3 (ZC5979)
Diagnostic Mode:
Standard Print
Hex Dump
Auto line feed:
CR=CR + LF (Line Feed)
CR =CR (Carriage Return)
ACK on CR (ZC5979 Only)
Enabled
Disabled)
Soft Fault Recover (ACL Mode Only).
Host Controlled
Automatic
Conguration Mode
For journal and receipt printers, at the completion of the Conguration Report, the printer will
allow access to the Conguration Mode. Validation only printers will need to be congured
through the use of Command Codes. To enter the Conguration Mode press the Paper Feed
Button within 10 seconds. If the button is not pressed within this time limit, the printer will resume
normal operation. When the printer is in the Conguration Mode each conguration option will
be printed and the user will have 10 seconds to either change that option or to continue on
to the next option. Changes are made by pressing the Paper Feed Button. After the user has
completed the conguration the printer will print out its new conguration and return to normal
operation.
The rst option for each available option is the default setting. Some options are only available
for specic Control Languages.