A470e Users Guide

Pertech® 2006 12

The A470e produces a printout listing the current conguration settings. A sample printout is
included on the following page. Receipt and Receipt/Journal printers will print a Conguration
Report if the Paper Advance Button on the top cover is depressed and held while the printer
power is turned ON.
Validation printers will print a Conguration Report if the Paper Advance Button is pressed and
held down when the printer is powered on. It will take several inserted forms to print the entire
Conguration Report.
To print the conguration report, complete the following steps.
1. If necessary turn the printer off.
2. Press and hold the Paper Feed Button and then press the Power Button to the ON
position. Release the Paper Feed Button when the Slip LED begins ashing. The printer
will begin to print the Conguration Report.
3. If you want to change the conguration settings or run the Extended Self Test , when
prompted press the Paper Feed Button, otherwise, wait ten seconds for the printer to
return to normal operation.
Chapter 3: Print Tests and Setup Mode

Conguration Report

Two reports are available:
Conguration Report : Includes read and write tests of internal RAM; and a printed report
listing the serial number, rmware, control language, font, serial parameters, USB, hardware
settings, memory information, tallies, and the printer compatibility mode.
Extended Self Test: Checks printhead pin ring, vertical line adjustment, fonts,
validation clamp, pitches and character sets.
Printer Conguration Mode can be entered after the Conguration Report is printed. The
Conguration Mode offers a variety of optional settings for the printer. See Conguration
Mode later in this chapter.