Petsafe PDT20-11939 To Turn the Receiver Collar On, To Turn the Receiver Collar Off

3.Plug the Universal Charging Adapter into a standard household electrical socket, using the appropriate adapter plug.

4.Charge the Receiver Collar until the Green Indicator Light comes on and is solid. Recharges take only

3-4 hours.

5.When charging is completed replace the rubber cover.

900 metre Big Dog Receiver Collar

Charger connector placed in Receiver Collar Charging Jack

To Turn the Receiver Collar On

1.Press and hold the On/Off button until the Green LED comes on and the Receiver Collar beeps low to high.

2.Release the On/Off button.The Green LED will flash once every 5 seconds until the Receiver Collar is turned off.The flashing light indicates the Receiver Collar is ready to receive a radio signal from the

Remote Transmitter.

3.Once the Receiver Collar has been turned on, press the Upper Left button of the Remote Transmitter. Upon pressing, the Receiver Collar should beep for as long as the Upper Left button is pressed. If it does not, see “To Pair the Remote Transmitter and the Receiver Collar”. Note:To extend the life of the battery, turn the Receiver Collar off when it is not in use.

350 metre Little Dog Receiver Collar

On/Off Button

900 metre Big Dog Receiver Collar

On/Off

Button

To Turn the Receiver Collar Off

1.Press and hold the On/Off button until the Red LED comes on and the Receiver Collar beeps high to low.

2.Release the On/Off button. To extend the life between charging cycles, turn the Receiver Collar off when it is not in use. Approximate battery life between charges is 40-50 hours, depending on frequency of use.

10 www.petsafe.net