Petsafe PDT20-11939 manuel dutilisation Operating Guide, Step Prepare the Remote Transmitter

Receiver Indicator Light: Indicates when the Receiver Collar has been turned on or off and also serves as a low-battery indicator.

Charging Jacks: For connecting the charger. The Remote Transmitter and Receiver Collar are waterproof without the charger covers. However, keep the charger covers in place when not charging to keep debris out of the openings. Continuous Stimulation:You control when and how long Stimulation is delivered to your dog through the Receiver Collar’s Contact Points. When a Continuous Stimulation button is pressed for 8 seconds or more, the Remote Transmitter will “time-out.” The button will need to be released and pressed again before additional Stimulation can be delivered.

Positive Tone: Use the Positive Tone as a marker to reinforce positive behaviour. Again, timing is critical. Praise or treat the dog immediately following the Positive Tone.

Operating Guide

Step Prepare the Remote Transmitter

Charge the Remote Transmitter
1. Lift the rubber cover
1	protecting the Remote
	Transmitter Charging Jack.
2. Connect one of the charger
	connectors to the Remote
	Transmitter Charging Jack.
3. Plug the Universal Charging		Charger
	Adapter into a standard
		connector
	household electrical socket,	placed in the
	using the appropriate	Handheld
	adapter plug.	Transmitter
		Charging Jack

4.Charge the Remote

Transmitter for 5 hours for the first charge. Recharges take only 3-4 hours.

Note:The Battery Indicator will scroll while charging and will become solid when fully charged.

5.When charging is completed, replace the rubber cover.

Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use.

6 www.petsafe.net