Petsafe PDT20-11939 Test Light Instructions, Accessories, Description, Part Number

Test Light Instructions

1. Turn the Receiver Collar on.

2. Hold the Test Light Contacts to the Contact Points.

3. Press a Stimulation button on the Remote Transmitter.

4. The Test Light will flash. Note: At higher Stimulation Levels, the Test Light will flash brighter.

5. Turn the Receiver Collar off.

Save the Test Light for future testing.

Note: If the Test Light does not flash, recharge the battery and re-test. If Test Light still does not flash, contact the Customer Care Centre or visit our website at www.petsafe.net.

Accessories

To purchase additional accessories for your PetSafe® 350 m/900 m Series Remote Trainers, contact the Customer Care Centre or visit our website at www.petsafe.net to locate a retailer near you.

Description	Part Number
350 m Add-A-Dog®	PDT20-11977
900 m Add-A-Dog®	PDT20-11979
Accessory Pack (Long Probes; Hex wrench/Mud	RFA-380
plug cover; Mud plug cover screw)
Replacement collar; Screws; C-loop	RFA-382
Snap Buckle	RFA-381
Universal Charging Adapter	RFA-395
Lanyard	RFA-189

www.petsafe.net 21