Petsafe PDT20-11939 +2 Boost, Step Prepare the Receiver Collar, Remote Transmitter Belt Clip

+2 Boost

A press of the +2 Boost button sends a signal to the collar to issue a correction that is 2 levels higher than the currently selected level. For example, if the correction level is set at Level 2, a touch of the +2 Boost control will correct at

Level 4. The system will not correct higher than level 10.

________________________________________________________________

Remote Transmitter Belt Clip

To remove:

1.Press down and hold the Release on the Belt Clip.

2.Press upward on the Release and slide the Belt Clip out

of the insert.

To replace:

1.Slide the Belt Clip into the insert until it clicks.

Belt Clip

Lanyard Clip

____________________________________

Step Prepare the Receiver Collar

2Charge the

Receiver Collar

1. Lift the rubber cover protecting the Receiver Collar Charging Jack.

2. Connect the charger connector to the Receiver Collar Charging Jack.

350 metre Little Dog Receiver Collar

Charger connector placed in Receiver Collar Charging Jack

www.petsafe.net 9