Petsafe PDT20-11939 manuel dutilisation Step Fit the Receiver Collar

Step Fit the Receiver Collar

Important: The proper fit and placement of your Receiver

3Collar is important for effective operation. The Contact

Points must have direct contact with your dog’s skin on the underside of his neck.

To assure a proper fit, please follow3A these steps:

1. Make sure that the Receiver Collar is turned off.

2. Start with your dog standing comfortably (3A).

3. Place the Receiver Collar on your dog’s
neck close to the	3B
ears. Centre the
Contact Points
underneath your
dog’s neck, touching
the skin (3B).
Note: It is sometimes
necessary to trim	3C
the hair around
the Contact Points
to make sure that
contact is consistent.
Longer probes are
also available through
our Customer Care
Centre. For a listing of
Customer Care Centre

telephone numbers, visit our website at www.petsafe.net.

4.Check the tightness of the Receiver Collar by inserting one finger between the collar and your dog’s neck (3C). The fit should be snug but not constricting.

5.Allow your dog to wear the Receiver Collar for several minutes then recheck the fit. Check the fit again as your dog becomes more comfortable with the Receiver Collar. Note: If your dog is young and you expect him/her to grow, you’ll want to leave excess strap to adjust the collar fastening. Replacement straps are available through our Customer Care Centre. For a listing of Customer Care Centre telephone numbers, visit our website at www.petsafe.net.

12 www.petsafe.net