Petsafe PDT20-11939 Turning ON the Transmitter, Transmitter Digital Display, Numeric, readout

Turning ON the Transmitter

Power up the Transmitter by pressing any button.You will see the display turn on when you press any button.

Transmitter Digital Display

The display stays on for 10 minutes after a button press. After 10 minutes with no button presses, the display shuts off and the transmitter goes into battery conservation mode. Pressing any button will cause the display to turn back on. The various symbols you might see on the display are explained below.

Numeric	Shows the chosen stimulation level for
readout	Dog 1 or Dog 2.
Dog 1/	The symbol displayed is the active dog
Dog 2	receiver collar. See Two Dog System
	on page 14.
Tone or	When pressing Tone or Stimulation
Stimulation	the Dog 1 or Dog 2 symbol will appear
	in bold or emphasized.
Battery	The battery indicator provides
Indicator	constant awareness of your battery’s
	power level. See the next section for
	more detailed information on the
	Battery Indicator.

Note:Factory default setting is for Dog 1 mode, you will not see the Dog 2 symbol unless the unit is programmed for Dog 2 (see Two Dog System on page 14).

www.petsafe.net 7