Philips 9750 user manual Foot Control and Philips conference microphone LFH

Philips 9750 - User Manual

Note: When you set the switch to the N position the function is press-and-hold. This setting means that you have to keep the Playback pedal pressed during playback. When you release the pedal, playback is stopped.

3.Connect the Philips microphone LFH 276/10 to the MIC socket of the Philips 9750.

4.Keep the REC button on the Philips microphone LFH 276/10 pressed and press the middle pedal on the Foot Control at the same time.

5.HF will appear on the display of the Philips 9750. This means that the device is now in Recording mode.

To start and stop recording:

To start recording, press the right pedal. The recording LED on the Philips microphone LFH 276/10 shines red. To stop recording, press the right pedal again. The recording LED starts to blink. This indicates the dictation is in Record Standby mode.

To finish recording and fast rewind:

To finish recording, press the left pedal. To fast rewind, keep the left pedal pressed. Release the pedal when you have reached the required position in the sound file.

To start and stop playback:

When you have finished recording, you can start playback by pressing the right pedal. To stop playback, press the right pedal again.

To switch from playback to recording:

Press the middle pedal; this sets Record Standby mode. The recording LED on the Philips microphone LFH 276/10 starts to blink. To start recording, press the right pedal. The recording LED shines red.

To leave Recording mode:

Press the STOP/PLAY button on the Philips 9750.

Foot Control and Philips conference microphone LFH 172

To use the Foot Control in combination with the Philips conference microphone LFH 172 for recording, do the following:

1.Connect the Foot Control to the FOOTSW socket of the Philips 9750.

2.Set the switch on the underside of the Foot Control to the T position (press-and-release). This setting means that playback is started when the Playback pedal is pressed once. To stop playback, you have to press the pedal again.

Note: When you set the switch to the N position the function is press-and-hold. This setting means that you have to keep the Playback pedal pressed during playback. When you release the pedal, playback is stopped.

3.Connect the Philips conference microphone LFH 172 to the CONF. REC socket of the Philips 9750.

4.Press the DOWNLOAD and the SKIP/FWD buttons on the Philips 9750 and the middle pedal of the Foot Control simultaneously.

5.HF will appear on the display of the Philips 9750. This means that the device is now in Recording mode. Operate the Philips 9750 in Recording mode as explained above.

26