Philips DMR-EH60 operating instructions Erasing all titles and playlists-Erase all titles

Erasing all titles and playlists—Erase all titles

[HDD] [RAM]

Preparation

≥Press [HDD] or [DVD] to select the drive. ≥Release protection (➡ 50).

After performing steps 1–3 (➡ 50)

4 Press [3, 4] to select “Erase all titles” and press [ENTER].

5 Press [2, 1] to select “Yes” and press [ENTER].

6 Press [2, 1] to select “Start” and press [ENTER].

A message appears when finished.

7 Press [ENTER].

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

[Note]

≥Once erased, the recorded contents are lost and cannot be

restored. Make certain before proceeding.

≥Erasing all video titles will result in all playlists also being erased. ≥Still picture data (JPEG, TIFF) or computer data cannot be erased. ≥Erase does not work if one or more titles are protected.

Erasing all the contents of a disc or card—Format

[HDD] [RAM] [-RW‹V›] [-RW‹VR›] [SD]

Preparation

≥Press [HDD], [DVD] or [SD] to select the drive. ≥Release protection (➡ 50).

[Note]

Formatting erases all contents (including computer data), and they cannot be restored. Check carefully before

proceeding. The contents are erased when you format a disc or card even if you have set protection.

After performing steps 1–3 (➡ 50)

4 Press [3, 4] to select “Format HDD”, “Format Disc” or “Format Card” and press [ENTER].

5 Press [2, 1] to select “Yes” and press [ENTER].

6 Press [2, 1] to select “Start” and press [ENTER].

A message appears when formatting is finished.

[Note]

≥Formatting normally takes a few minutes; however, it may take up to a maximum of 70 minutes ([RAM]).

≥Do not disconnect the AC mains lead while formatting.

This can render the disc or the card unusable.

7 Press [ENTER].

[Note]

≥When a disc or card has been formatted using this unit, it may not be possible to use it on any other equipment.

≥Formatting cannot be performed on DVD-R, +R or CD-R/RW. ≥You can format DVD-RW only as DVD-Video format on this unit.

To stop formatting [RAM]

Press [RETURN].

≥You can cancel formatting if it takes more than 2 minutes. The disc must be reformatted if you do this.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

HDD, disc and card management

RQT8203

51

51