Philips DMR-EH60 operating instructions Inserting, Removing the SD card, Televisions

Inserting, Removing the SD card

Only insert or remove the SD card after turning the unit off.

When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card. Such action may result in malfunction or loss of the card’s contents.

televisions

Opening the cover

Press down.

Inserting the card

Press on the centre of the card until it clicks into place.

If you are using a
miniSDTM card, insert it
into the miniSDTM card
adaptor that comes
with the card.	ADAPTER
Insert and remove this
adaptor from the unit.

Removing the card

1Press on the centre of the card.

2Pull it straight out.

Closing the cover

Push up.

Inserting, Removing the SD card / Note to owners of progressive compatible PAL system

Insert the card label up with the cut-off corner on the right.

(Do not forget to close the cover. ➡ right)

≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (➡ 11).

Note to owners of progressive compatible PAL system televisions

≥If you have an LCD/plasma television or LCD projector	≥If you have a regular television (CRT: cathode ray tube)
Using progressive output, you can enjoy high-resolution video	Use component output with progressive “Off” (Factory setting ➡ 57),
recorded on media such as DVD-Video. Connect this unit’s	even if it is progressive compatible, because progressive output can
component video output terminals to your television and turn on the	cause some flickering. This is the same for multi system televisions
progressive output setting (➡ 16, 20).	using PAL mode.

COMPONENT	COMPONENT
VIDEO IN	VIDEO IN

Progressive output Progressive output

COMPONENT	COMPONENT
VIDEO OUT	VIDEO OUT

RQT8203

6

6