Philips DMR-EH60 operating instructions Glossary

Q Link

This function works only if the unit is connected via a fully wired 21- pin Scart cable to a TV featuring the Q Link or similar function.

Q Link offers the following functions: ≥Download from the TV§

When you connect the unit to a TV, the station list data is automatically copied from the TV to the unit, and the TV stations are assigned to the programme positions on the unit in the same order as on the TV.

≥Direct TV Recording

By simply pressing [¥ DIRECT TV REC], you can at once record the same programme that you are watching on the TV.

≥TV/DVD Auto On§

Even if the TV and the unit are off (standby mode), pressing [1] (PLAY), [DIRECT NAVIGATOR, TOP MENU], [GUIDE], [ShowView] or [PROG/CHECK] automatically turns on both the TV and the unit.

If the TV is off (standby mode) and the unit is on, when you press [FUNCTIONS] or [1] (PLAY), or insert the disc [except DVD-RAM, DVD-R, DVD-RW (DVD-Video format) and +R], the TV is automatically turned on.

≥DVD Auto Standby§

When you turn the TV off, the unit is turned off as well. However, this function works in the stop mode.

This function does not work during the following operations: Preset Download, Auto-Setup, Auto Clock Setting, Child Lock and Manual Tuning.

VPS (Video Programme System)/PDC (Programme Delivery Control)

VPS or PDC is a very convenient system which records exactly from beginning to end of the TV programmes set in timer recording, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension of the programme duration. Also, if a programme is interrupted, for example, some special news is inserted, the recording will be paused automatically and resumed when the programme continues.

Depending on the signals sent from the TV stations, the VPS/PDC system may not work properly even when “VPS/PDC” has been set to “ON”.

Please check with the broadcasters in your area for details.

≥In the case of VPS/PDC recording, use the correct time (VPS/PDC time) for recording the TV programmes.

Set “VPS/PDC” to “OFF” when the recording time is not the correct time (VPS/PDC time).

VPS/PDC recording is not performed when the time (VPS/PDC time) is incorrect, even if only by one minute. To find out the correct time (VPS/PDC time), consult Teletext, a newspaper or magazine, or other source.

≥If the actual broadcasting times of timer recordings overlap (regardless of whether they are VPS/PDC controlled), the recording that starts first always has priority, and the recording of the later programme will start only after the first timer recording has finished.

≥On-Screen Messages§

When you are watching a TV programme, the following messages appear on the TV screen to inform you of the unit’s condition:

Message	Message appears when:
This programme has	A timer recording has just started.
already started
Set DVD to timer	The unit is not in the timer standby mode
standby mode	10 minutes before the programmed
	recording start time (message appears
	every minute during these 10 minutes).
DVD is in timer	[¥ REC] on the main unit or [ShowView]
recording mode	was pressed while the unit is in the timer
	recording mode.

Depending on the type of TV used, the above messages may not appear correctly.

§These operations are only available if the unit is connected to a TV featuring the Q Link function.

≥If you have an IDTV with electronic programme guide function for digital broadcasts, you can perform timer recording using the electronic programme guide function. Refer to the television’s operating instructions for further information.

≥When the VPS/PDC signal drops out because the broadcast signal is weak, or when a TV station does not transmit a regular VPS/ PDC signal, the timer recording will be performed in the normal mode (without VPS/PDC) even if it was programmed for VPS/PDC. In this case, even if the timer recording is performed, whatever has been programmed will not be cancelled at that particular time but at 4 a.m. two days later.

≥The start times of scheduled programmes listed in the newspaper or magazine may be changed at a later date. Set “VPS/PDC” to “OFF” when programming a programme whose start time has been subsequently changed. Particular care must be taken in this respect with SHOWVIEW programming since “VPS/PDC” is automatically set to “ON” in some countries (➡ below).

≥If a programme listed in a newspaper or magazine has two SHOWVIEW numbers, use the SHOWVIEW number for VPS/PDC if you wish to proceed with VPS/PDC recording using SHOWVIEW programming.

≥The default settings for “VPS/PDC” differ depending on the country concerned. Refer to the following table.

Glossary

	When SHOWVIEW	When the SHOWVIEW programming	When programming
	programming	start time is changed	manually
Belgium, Netherlands, Sweden,	ON	OFF	OFF
Denmark, Finland, Norway, France
Germany, Switzerland, Austria	ON	ON	ON
Italy, Spain, Portugal, Greece,	OFF	OFF	OFF
Other Countries

≥If the broadcasting station is not transmitting VPS/PDC signals, “jjj” appears in the menu for timer programming under “VPS/PDC”. ≥The beginnings of recordings may not be recorded correctly in some cases.

RQT8203

69

69