Eng
Troubleshooting (continued)
Problem (Recording) | Solution |
|
|
lish
Recordings are not occurring as scheduled. New recordings cannot be made.
–The TV channel you want to record is not stored or you selected the wrong program number. Check the TV channels stored.
–You have to reset the timer recording after adjusting the clock setting.
–You cannot use the recorder to duplicate
–The hard disk could be full. Delete some titles to create space for new recordings.
The wrong TV channel was decoded (recorded) after you programmed a recording using the VCR Plus+® system.
Picture is fuzzy and brightness varies when copying DVD Video discs or prerecorded video cassettes.
1)Enter the VCR Plus+® programming number of the desired TV channel.
2)Press OK to confirm.
3)Check the channel number in the {Program #} input field. If this does not correspond to the desired TV channel, select this entry field and change the channel number.
4)Press OK to confirm.
–This happens if you try to copy DVDs or video cassettes that have been
–The DVD recordable disc has a limited recording lifetime, please change a new disc for recording.
The message ‘This will clear the time shift buffer’ appears.
There is a power failure during the deleting of the recorder’s HDD contents.
There is a power failure during the copying of files to a DVD±R disc.
During recording from the time shift buffer, it is not possible to start or stop a recording.
–The requested action requires that the time shift buffer (temporary HDD storage) to be cleared. All contents that were not marked for recording will be deleted.
–You have to reselect the { Delete HDD } option and delete the HDD contents again.
–The titles that were previously recorded will be deleted and the space used for recording cannot be
–Parts of the signal may be
–Use WX keys or à á keys to navigate to a
–Press SELECT to clear a recording at any time.
78
