Philips MCI8080/12 user manual Location and time zone, Language, Device information, Demo mode

2Connect MCi8080 as you did in the first-time setup (see ‘First-time setup’- >’Connect to home Wi-Fi/wired network’).

Device name

In [Device name], you can name/rename your MCi8080. On a connected UPnP server/client, the MCi8080 can be found as named.

1From Home screen, go to [Settings] > [Network settings] > [Device name].

2In [Device name], press/to select the entry location; press/ repeatedly to select desired letters.

USB sharing

When you connect MCi8080 to home Wi- Fi/wired network, the HDD connected to MCi8080 can work as a shared disk of the network. Contents on the HDD can be played or shared on computers or UPnP devices that are also connected to the network.

•To permit or prohibit the sharing, go to [Settings] > [Network settings] > [USB sharing]. Press OK to turn on or off the sharing.

Location and time zone

After the first-time setup, you can change the selected location and time zone when moving to a new location or time zone.

According to the selected location and time zone, MCi8080 can

•Set clock automatically over the Internet (see ‘Settings’->’Date and time’);

•Pre-load preset Internet radio stations automatically.

Language

After the first-time setup, you can change the language selection in [Settings] > [Language].

Device information

From the home screen, go to [Settings] > [Device ID and information].You can learn about information about MCi8080, including model number, name to be shown on a UPnP server/client, software version and network settings.

Check for software upgrades

On the MCi8080, you can check for software upgrades.After you click to agree to the terms and conditions, the downloading and installation of new upgrades start automatically.

1Ensure that MCi8080 is connected to the Internet.

2From Home screen, go to [Settings] > [Check for software upgrades].

Demo mode

After the first-time setup, you can view the demo again.

1From Home screen, go to [Settings] >

[Demo mode].

» Demo play starts.

2To exit the demo play, press.

» The unit is switched to Eco standby.

60EN