13
Automatic (Internet)
Automatic (RDS)
Manual
Tip
•According to the location and time zone you select, the unit can have the clock time set and adjusted automatically through the online service over the Internet.
•To check and change current location and time zone, go to [Settings] > [Location and time zone].
Through time signals from FM RDS radio
1On the unit, turn on the FM radio, if necessary.
•Ensure that the FM antenna is connected properly
2On the first location for preset stations, store an FM RDS station that transmits time signals.
3From Home screen, select [Settings] > [Clock settings] > [Date and time].
•Or, press SETTINGSon the remote control to enter [Settings].
4In [Date and time], select [Current date and time] > [Automatic (RDS)].
»The unit searches for the first preset station automatically.
»The time is set according to time signals from the station.
Manual setting |
| |
1 | Turn on the unit, if necessary. | English |
2 | From Home screen, select [Settings] > | |
[Clock settings] >[Date and time].
• Or, press SETTINGSon the remote control to enter [Settings].
3In [Date and time], select [Current date and time] > [Manual].
4To enter date and time,
• | Press or to select the entry |
| location; |
•Use the alphanumeric buttons to enter desired digits;
•Press OK to confirm.
• | You can also press or |
| repeatedly, or press and hold or |
| until the desired digit appears. |
Set date/time format
Select how date and time are displayed in the clock.
1Follow Step
2In [Date and time], go to [Time format] or [Date format] to select options.
Network settings
Setup network
After the
•Switch between different connection methods (wireless or wired, automatic or manual);
•Switch between different routers. To do so, do the following:
1 From Home screen, go to [Settings] > [Network settings] > [Setup network].
•Or, press SETTINGS on the remote control to enter [Settings].
EN 59
