EasyLink remote control
You can control multiple
System audio control
If you connect an
Synchronise audio
If you connect your TV to a home theatre, you can synchronise the audio and video to avoid lag between the picture and sound.
Retain picture quality
If your TV picture quality is affected by the
Maximise display for subtitled video
Some video subtitles can create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift and display the subtitles on top of the video image.
Switch off connecting device
If your connecting device is not the active source, you can save energy by setting the TV to switch it to standby.
What you need
∙Connect at least two
compliant devices through HDMI. See Connect your TV > Connect devices (Page 34).
∙Configure each
∙Switch on EasyLink
Switch on EasyLink
1.Press .
2.Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
3. Select [On] or [Off], then press OK.
EN 22
Control devices simultaneously
If you connect multiple
Note: This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control.
1.Press .
2.Select [Setup] > [TV settings] >
[EasyLink].
3.Select [EasyLink remote control] > [On] or [Off].
4.Press OK to activate.
Tips:
∙To switch back to TV control, press , then select [Watch TV].
∙To control another device, press , then select the device from the Home menu.
∙To exit, press .
EasyLink buttons
You can control
∙: Switch the TV and the connected device on or to standby.
∙Play buttons: Control video or music play.
∙Numeric buttons: Select a title, chapter or track.
∙OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu.
∙ / : Search backwards and forwards on the connected device.
∙: Display the TV Home menu.
You can also control devices through other EasyLink buttons that are available through the
To access the OSRC
1.While you view content from a connected
device, press OPTIONS.
2.Select [Show remote control], then press OK.
3.Select an onscreen button, then press OK.
4.Press to exit.