Text language
For digital TV channels where the broadcasters provide different text languages, you can select your preferred primary and secondary language.
1.Press .
2.Select [Setup] > [Channel settings] or
[Satellite settings].
3.Select [Languages] > [Primary Text] or [Secondary Text].
4.Select a language, then press OK.
Subpages
If the text page contains several subpages, you can view each subpage in succession. These subpages are shown on a bar next to the main page number.
If subpages are available, press or to select them.
Digital text
If a digital TV channel's broadcaster offers dedicated digital text or interactive services, you can view digital text. Such channels, such as BBC1, may have digital text with more interactive features.
Note: Digital text services are blocked when
subtitles are broadcast and switched on. See Set up your TV > Language settings >
Subtitles (Page 30).
When in digital text:
∙Press the Navigation buttons to select or highlight items.
∙Press the Colour buttons to select an option, then press OK to confirm or activate.
Text 2.5
With Text 2.5, you can view text with more colours and better graphics than normal text. If Text 2.5 is broadcast by a channel, it is switched on by default.
To switch Text 2.5 on or off
1.Press .
2.Select [Setup] > [TV settings] >
[Preferences].
3.Select [Text 2.5] > [On] or [Off], then press OK.
EN 20
Set locks and timers
Clock
You can display a clock on the TV. The clock displays the time that is broadcast by your TV service operator.
Display the TV clock
1.While you watch TV, press OPTIONS.
2.Select [Clock], then press OK.
The clock is displayed at the top
Change the clock mode
You can change the clock mode to automatic or manual. By default, it is set to automatic mode, which automatically synchronises it to Coordinated Universal Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to [Manual].
1.While you watch TV, press .
2.Select [Setup] > [TV settings] >
[Preferences].
3.Select [Clock] > [Auto clock].
4.Select [Automatic] or [Manual], then press OK.
Enable or disable daylight saving time You can enable or disable daylight saving time depending on your region. Before you
enable or disable daylight saving time, set the clock mode to [Auto clock] > [Manual].
1.In the [Clock] menu, select [Daylight saving].
2.Select [Daylight saving time] or [Standard time], then press OK.
Daylight saving time is enabled or disabled. Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to [Manual].
1.In the [Clock] menu, select [Date] or [Time], then press OK.
2.Use the Navigation buttons to make your
selection.
3. Select [Done], then press OK.