Philips PFL30X7T, PFL38X7H, PFL35X7H, PFL38X7K, PFL32X7H Select speaker output, Synchronise audio

Select speaker output

If the connected device is HDMI-CEC compliant, you can output TV audio through an HDMI cable. Make sure that you connect

the device to the HDMI connector on the TV. See Connect your TV > About cables

>HDMI (Page 33).

Configure TV speakers

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [TV speakers].

3.Select an option, then press OK: ∙ [Off]: Switch off TV speakers. ∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Stream TV audio through the HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC

audio device through the Adjust menu.

∙ [EasyLink autostart]: Switch off TV speakers automatically and stream TV audio to the connected HDMI-CEC audio device.

Select speaker output with the adjust menu If [EasyLink] or [EasyLink autostart] is selected, you can change how the TV audio is streamed to the connected HDMI-CEC device.

1.While you watch TV, press ADJUST.

2.Select [Speakers], then press OK.

3.Select one of the following, then press OK:

∙ [TV]: On by default.

Stream TV audio through TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected

device.

∙ [Amplifier]: Stream audio through the connected HDMI-CEC device. If system audio mode is not enabled on the

device, audio continues to stream from the TV speakers. If [EasyLink autostart] was selected, the TV prompts the connected device to switch to system audio mode.

With HDMI ARC compliant device If an HDMI-ARC compliant device is connected through an HDMI ARC connector to the TV, you can output TV audio through the HDMI cable. You will not need an additional audio cable.

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink].

3.Select [HDMI1 - audio out] > [On].

4.Select one of the following, then press OK.

∙ [On]: Hear the TV audio through the

connected ARC compliant device.

∙ [Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector.

5.Control playback with the TV remote control play buttons.

Listen to another device when TV is in standby

If available,you can press ADJUST to receive audio from a connected Philips EasyLink device while the TV is in standby mode.

Synchronise audio

If your TV is connected to a home theatre and there is a lag between the picture and the sound, you can synchronise them.

∙If you are using a Philips home theatre, the audio and video are automatically synchronised.

∙For other home theatre brands, you need to switch on the audio sync delay on the TV to synchronise the audio and video.

Switch on Audio Out Delay

1.Press .

2.Select [Setup] > [TV settings] > [Sound].

3.Select [Audio out delay] > [On], then press OK.

English

EN 23