2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
∙Press the power switch on the TV.
∙If the TV is in standby, press on the remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby, press CH +/- on the TV.
Switch TV to standby
Press on the remote control.
The remote control sensor on the TV switches to red.
Switch off the TV
Press on the TV. The TV switches off.
Note: Though your TV consumes very little energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.
EN 12
Automatic switch off
You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby.
To disable automatic switch off
1.While you watch TV, press the Green button on the remote control.
2.Select [Auto switch off], then press OK.
3.Use the Navigation buttons to make a selection, then press OK.
Adjust TV volume
Increase or decrease the TV volume
∙Press +/- on the remote control.
∙Press +/- on the side of the TV.
Mute or unmute the TV volume
∙Press on the remote control to mute the volume.
∙Press again to restore the volume. Adjust headphone volume
1.Press > [Setup] > [TV settings] > [Sound].
2.Select [Headphone volume], then press OK.