4 Set up your TV
Picture and sound
Settings assistant
You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately.
1.While you watch TV, press .
2.Select [Setup] > [Quick picture and
sound settings], then press OK.
3.Select [Continue], then press OK.
4.Follow the onscreen instructions to choose your preferred settings.
More picture settings
You can change the settings in the Picture menu.
1.Press .
2.Select [Setup] > [TV settings] > [Picture],
then press OK.
3.Select a setting to adjust, then press OK. ∙ [Smart picture]: Access predefined
smart picture settings.
∙ [Reset]: Reset to default factory
settings.
∙ [Backlight]: Change the brightness of
the TV to match the lighting condition. ∙ [Video contrast]: Change the intensity of the bright areas, keeping dark areas
unchanged.
∙ [Brightness]: Change the intensity and
details of the dark areas.
∙ [Colour]: Change colour saturation.
∙ [Sharpness]: Change sharpness.
∙ [Noise reduction]: Filter and reduce noise.
∙[Tint]: Change the colour balance.
∙[Custom tint]: Customise tint setting. (Only available if [Tint] > [Custom] is selected)
∙[Digital Crystal Clear]: Control advanced settings to
Produce a brilliant, high definition image. - [Advance sharpness]: Enable superior
sharpness, especially on lines and contours in the picture
-[Dynamic contrast]: Set the level at which the TV automatically enhances details in the dark, middle and light areas of the picture.
-[Dynamic backlight]: Reduce power consumption by dimming the TV backlight to match the room lighting conditions.
-[MPEG artifact reduction]: Smooth
the digital transitions in the picture.
-[Colour enhancement]: Change the colours to be more vivid and improve the resolution of details in bright colours.
-[Gamma]:
∙[PC mode]: When a PC is connected
through HDMI, change the picture format to [Unscaled] to display maximum detail.
∙[Picture format]: Change the picture format.
∙[Screen edges]: Change the picture size.
∙[Picture shift]: Move the position of the
picture. You cannot select this setting if the selected picture format is [4:3], [Auto fill], [Auto zoom] or [Wide screen].
English
EN 25