Update software
Check version
1.Press .
2.Select [Setup] > [Software settings] >
[Current software inf], then press OK.
The version of the current software is displayed.
Caution: Do not install a lower version of software than the current version installed on your product. TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade.
Update the software through one of these methods:
∙update with USB storage device
∙update from digital broadcast
Update with USB
Before you update the software, make sure that you have:
∙A USB storage device that has at least 256 megabytes of storage space, is FAT or DOS formatted and has its write protection disabled.
∙Access to a computer with a USB connector and Internet access.
Note: Do not use a USB hard drive.
1.Connect a USB storage device.
2.Press .
3.Select [Setup] > [Update software], then
press OK.
The update assistant starts.
4.Follow the onscreen instructions to start the update.
Note: The update assistant directs you to the Philips support website. See the installation instructions on the website to complete the update.
Update from digital broadcast
When available, the TV can receive software updates through digital broadcasts. When a software update is received, you are prompted to update the software. We strongly recommend that you update the software when prompted.
Follow the onscreen instructions.
Note: To update the software later, select > [Setup] > [Software settings] > [Local updates].
Select the file that you downloaded and follow the onscreen instructions to complete the update.
Restore default settings
You can reset all picture and sound settings and reinstall all TV channels on your TV.
1.Press .
2.Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN 32