Philips PFL32X7H Language settings, Add and remove satellites, Menu language, Audio language

Test signal strength

If a channel or transponder is skipped during installation, you can test the signal strength of a satellite or add a new channel.

1.While you watch TV, press .

2.Select [Setup] > [Search for satellite] >

[Satellite reception test], then press OK.

3.Select the LNB.

4.If you know the frequency of the

transponder (which can include several channels), select [Frequency] and enter it.

5.Select [Search], then press OK.

6.If a new frequency is found, press [Store]to add the new transponder with its channels.

Update satellite channels

1.While you watch TV, press .

2.Select [Setup] > [Search for satellite] >

[Update channels].

3.Follow the onscreen instructions to complete the installation.

4.Once complete, select [Finish], then press OK.

Add and remove satellites

You can add or remove satellites at any time, and install channels from new satellites.

Note: Before you add satellites, make sure that the connection type is correct. See Set up your TV > Satellite Settings > Install channels (Page 28).

1.Press > [Setup] > [Search for satellite], then press OK.

2.Select [Add satellite], then press OK. The TV searches for a satellite on the first free LNB. This can take several minutes. If no satellite is found, check the antenna connections and the position of the dish antenna.

3.If no satellite is found, select [Restart].

∙If you are satisfied with the added satellite, install the channels.

4.To install all channels, select [Install]. The installation can take several minutes. Remove a satellite

1.Press > [Setup] > [Search for satellite].

2.Select [Remove satellite], then press OK.

3.Select the satellite you want to remove, then press OK.

Language settings
Menu language	English

1. While you watch TV, press .

2.Select [Setup] > [TV settings] > [Preferences] > [Menu language].

3.Select a menu language from the list, then press OK.

Audio language

Set default audio language

For digital channels that are broadcast with multiple audio languages, you can set your preferred audio languages. The TV automatically switches to one of these languages, if they are available.

1. Press .

2.Select [Setup] > [Channel settings] or [Satellite settings] > [Language].

3.Select [Primary audio language] or [Secondary audio language] to set the preferred audio languages, then press OK.

4.Select the language, then press OK.

Select audio language

If the TV channel broadcasts multiple or dual audio languages, you can select the preferred audio language.

1. While you watch TV, press OPTIONS.

2.Select [Audio language] for digital channels or [Dual I-II] for analogue channels, then press OK.

3.Select from the available languages, then press OK.

Subtitles on analogue channels

1.While you watch an analogue TV channel, press TEXT.

2.Enter the three-digit page number of the subtitles page (usually '888').

If available, subtitles are switched on.

3. Press to exit text.

EN 29